Standard Kit for Wurlitzer 200

Tech Questions regarded the Wurlitzer Electric Piano

Standard Kit for Wurlitzer 200

Postby miltown on Mon May 23, 2011 9:59 am

Hey I just purchased the standard kit for the Wurlitzer 200. I have a few questions. The transistors , the pinouts I assume are the same as the originals and the 3 .33uf caps are to replace the original (C38,C44,C27) 3 virbrato caps that are .12uf , you guys are just bumping them up I assume. Also there is a 4th virbrato cap that is .22uf (C47) that is not included in the kit. Is this all correct?

Thanks paul
miltown
 
Posts: 2
Joined: Fri May 20, 2011 11:59 pm

Re: Standard Kit for Wurlitzer 200

Postby purkolator on Thu Jul 07, 2011 4:17 pm

Transistor pinouts are NOT the same. Check the VV website for details. basically need to swap B and C legs on the small signal transistors.

The caps you are describing are the high voltage caps, NOT the vibrato caps. Some older 200's only have 2 of these, but you can mod the board to add the 3rd, which helps keep the proper voltage going to the reed bar.
purkolator
 
Posts: 28
Joined: Fri Apr 10, 2009 1:19 am
---------



Return to Wurlitzer Electric Pianos

Who is online

Users browsing this forum: No registered users and 0 guests

cron